Admin
مدير المنتدى
عدد المساهمات : 18726
التقييم : 34712
تاريخ التسجيل : 01/07/2009
الدولة : مصر
العمل : مدير منتدى هندسة الإنتاج والتصميم الميكانيكى
 |  موضوع: كورس الاعداد للحصول شهادة في احتراف الرسم والتصميم باستخدام الأوتوكاد - Cert Prep - AutoCAD for Drafting and Design Professional الأحد 11 فبراير 2024, 11:36 am | |
| 
أخواني في الله
أحضرت لكم كتاب
كورس الاعداد للحصول شهادة في احتراف الرسم والتصميم باستخدام الأوتوكاد
Cert Prep - AutoCAD for Drafting and Design Professional
و المحتوى كما يلي :
01 - Introduction \ 01 - What is AutoCAD certification
01 - Introduction \ 02 - Use the Autodesk website to get information
01 - Introduction \ 03 - Other suggested pre-exam courses
01 - Introduction \ 04 - What you should know before watching this course
01 - Introduction \ 05 - Using the exercise files
02 - 1. Application and Drawing Management \ 05 - Determine the origin of xref layers (bound and non-bound)
02 - 1. Application and Drawing Management \ 08 - Manage the UCS origin and rotation for specific project needs
02 - 1. Application and Drawing Management \ 10 - Analyze and modify objects within the Properties palette
02 - 1. Application and Drawing Management \ 11 - Leverage the MEASUREGEOM command to dynamically analyze and query values from geometric objects
02 - 1. Application and Drawing Management \ 12 - Use the COUNT command to analyze quantities of blocks in a drawing
02 - 1. Application and Drawing Management \ 17 - Perform drawing maintenance using the AUDIT, RECOVER, and RECOVERALL commands
02 - 1. Application and Drawing Management \ 18 - Use the Purge tools to manage content within the AutoCAD drawing
02 - 1. Application and Drawing Management \ 19 - Use the Drawing Recovery Manager to access and restore temporary files
02 - 1. Application and Drawing Management \ 01 - Create and manage layers (OVERVIEW)
02 - 1. Application and Drawing Management \ 02 - Assign and manage layer properties
02 - 1. Application and Drawing Management \ 03 - Apply layer property overrides in layout viewports
02 - 1. Application and Drawing Management \ 04 - Create and manage layer filters
02 - 1. Application and Drawing Management \ 06 - Manage user coordinate systems (OVERVIEW)
02 - 1. Application and Drawing Management \ 07 - Create and restore a named UCS
02 - 1. Application and Drawing Management \ 09 - Query and manage drawing object properties (OVERVIEW)
02 - 1. Application and Drawing Management \ 13 - Manage the application environment (OVERVIEW)
02 - 1. Application and Drawing Management \ 14 - Use common palette interface behaviors
02 - 1. Application and Drawing Management \ 15 - Customize the content on the user interface
02 - 1. Application and Drawing Management \ 16 - Maintain and manage drawing health (OVERVIEW)
03 - 2. Design Annotation and Detailing \ 06 - Add, delete, and manage scales assigned to annotative objects
03 - 2. Design Annotation and Detailing \ 08 - Manage annotative objects to display properly in viewports
03 - 2. Design Annotation and Detailing \ 10 - Create and modify annotations such as text, multileader, and dimensions
03 - 2. Design Annotation and Detailing \ 01 - Create and apply annotation styles (OVERVIEW)
03 - 2. Design Annotation and Detailing \ 02 - Create, manage, and apply annotation styles
03 - 2. Design Annotation and Detailing \ 03 - Create, manage, and apply table styles
03 - 2. Design Annotation and Detailing \ 04 - Apply annotative scaling to design content (OVERVIEW)
03 - 2. Design Annotation and Detailing \ 05 - Create and manage drawing scales in a drawing
03 - 2. Design Annotation and Detailing \ 07 - Manage the scale positions of annotative objects
03 - 2. Design Annotation and Detailing \ 09 - Add annotations to designs (OVERVIEW)
03 - 2. Design Annotation and Detailing \ 11 - Create and modify tables
04 - 3. Author and Edit Drawing Content \ 03 - Use the WBLOCK command to write blocks or objects to an external drawing file
04 - 3. Author and Edit Drawing Content \ 04 - Access blocks and block libraries using the Blocks palette
04 - 3. Author and Edit Drawing Content \ 07 - Create arcs in multiple directions with different values (center, chord length, and angles)
04 - 3. Author and Edit Drawing Content \ 10 - Define boundaries and boundary sets to create hatches in a drawing
04 - 3. Author and Edit Drawing Content \ 11 - Define and manage associative rectangular, polar, and path arrays
04 - 3. Author and Edit Drawing Content \ 12 - Edit geometry with grips and multifunctional grips (OVERVIEW)
04 - 3. Author and Edit Drawing Content \ 14 - Edit geometry by selecting multiple grips on the same object or multiple objects
04 - 3. Author and Edit Drawing Content \ 15 - Edit geometry by combining dynamic input and multifunctional grips
04 - 3. Author and Edit Drawing Content \ 17 - Use dynamic input to create and edit objects in a drawing
04 - 3. Author and Edit Drawing Content \ 19 - Specify points using absolute, relative, or polar coordinates
04 - 3. Author and Edit Drawing Content \ 01 - Reuse and leverage existing design content (OVERVIEW)
04 - 3. Author and Edit Drawing Content \ 02 - Create, manage, and edit block definitions
04 - 3. Author and Edit Drawing Content \ 05 - Use the clipboard
04 - 3. Author and Edit Drawing Content \ 06 - Create and edit geometry (OVERVIEW)
04 - 3. Author and Edit Drawing Content \ 08 - Create polylines from existing drawing objects
04 - 3. Author and Edit Drawing Content \ 09 - Offset existing geometry
04 - 3. Author and Edit Drawing Content \ 13 - Access alternate modify commands using grips
04 - 3. Author and Edit Drawing Content \ 16 - Draw and edit with precision (OVERVIEW)
04 - 3. Author and Edit Drawing Content \ 18 - Use object snap settings to create and edit objects
05 - 4. Configure and Manage Design Output \ 02 - Configure and manage named page setups applied to layouts
05 - 4. Configure and Manage Design Output \ 05 - Plot andor publish production drawing output (OVERVIEW)
05 - 4. Configure and Manage Design Output \ 06 - Define and manage a sheet list to publish multiple drawings
05 - 4. Configure and Manage Design Output \ 07 - Configure and use an Electronic Transmittal package (eTransmit)
05 - 4. Configure and Manage Design Output \ 08 - Use the Sheet Set Manager (Win) or Project Manager (Mac) (OVERVIEW)
05 - 4. Configure and Manage Design Output \ 09 - Create a new sheet (layout) within a sheet set (project)
05 - 4. Configure and Manage Design Output \ 10 - Modify sheet (layout) and sheet set (project) properties and generate sheet list (layout) tables
05 - 4. Configure and Manage Design Output \ 01 - Configure production drawing output (OVERVIEW)
05 - 4. Configure and Manage Design Output \ 03 - Create layout viewports
05 - 4. Configure and Manage Design Output \ 04 - Manage layout viewports
06 - 5. Collaboration \ 07 - Manage external reference paths and path types (full, absolute, relative, and none)
06 - 5. Collaboration \ 01 - Provide design feedback (OVERVIEW)
06 - 5. Collaboration \ 02 - Collaborate and use shared drawing files
06 - 5. Collaboration \ 03 - Create and manage Traces
06 - 5. Collaboration \ 04 - Compare objects between multiple versions of drawings with compare tools
06 - 5. Collaboration \ 05 - Manage references and underlays (OVERVIEW)
06 - 5. Collaboration \ 06 - Manage the reference type of an xref (attach and overlay)
06 - 5. Collaboration \ 08 - Manipulate image and underlay frames
06 - 5. Collaboration \ 09 - Incorporate external design data into project drawings (OVERVIEW)
06 - 5. Collaboration \ 10 - Create and manage PDF imports
06 - 5. Collaboration \ 11 - Display dynamic data using fields
07 - Conclusion \ 01 - Booking your Autodesk Certified Professional exam
#أوتوديسك,#أتوكاد,#أوتوكاد,#Autodesk,#Autocad,#Auto_Cad,#Auto Cad,#أوتودسك,#أتوديسك,#أتودسك,
كلمة سر فك الضغط : books-world.net
The Unzip Password : books-world.net
أتمنى أن تستفيدوا من محتوى الموضوع وأن ينال إعجابكم
رابط من موقع عالم الكتب لتنزيل كورس الاعداد للحصول شهادة في احتراف الرسم والتصميم باستخدام الأوتوكاد - Cert Prep - AutoCAD for Drafting and Design Professional
رابط مباشر لتنزيل كورس الاعداد للحصول شهادة في احتراف الرسم والتصميم باستخدام الأوتوكاد - Cert Prep - AutoCAD for Drafting and Design Professional 
|
|
